Supercharger / DC fast charging

A wallbox (or wall charging station) controls the charging process of your electric car in your home.You
can be conveniently mounted on the wall (e.g. in the garage) or on a column
(Steele). Wallboxes connect the power connection
safe with your electric car.

Modular means all the individual parts of the wallbox
are interchangeable. For example, if you notice this after changing your car
If a longer charging cable would be better, you can get this from us later
let grow. Should a part come in after years of perfect operation
If the wallbox breaks, send the wallbox back to stark-in-strom.de
and we will create a repair offer. This is possible because every part in ours
Wallboxes are interchangeable and use many standard components
can be. This means that the wallbox from stark-in-strom is absolutely sustainable
Champion.

An 11 kW wallbox is only subject to registration. Should the
However, if the total output of a wallbox is 22 kW, the wallbox requires approval.
By the way, this also applies if you have a DUO-CHARGE wallbox
Have a wallbox with two charging points. If each charging point has 11 kW, that is
Wallbox must be reported because the total output is then 22 kW. The legal basis for this is regulated in Section 19 of the Low Voltage Connection Ordinance (NAV). The regulation stipulates that since March 21, 2019, private operators have also been obliged to register their wallbox with the responsible network operator.

Our wallboxes are compatible with all electric vehicle manufacturers. The only crucial thing is that the electric vehicles have a TYPE 2 connection ; this applies to 95% of all European vehicle manufacturers. If you have any questions in advance about the compatibility of our wallboxes, please send us an email to technik@fbt-solution.de

All of our wall boxes from the EASY series and mobile charger EASY have MID-calibrated meters including an S-0 pulse output with which you can upload the meter to your automation solution. The frequency of the pulses is 800 pulses per kWh. If the aim is to bill external third parties, the wallbox must be equipped with a MID-calibrated electricity meter. This primarily concerns billing of company cars to the employer or the tax office. All wallboxes from stark-in-strom.de fulfill all of this. Click here for the technical data sheet of our MID-calibrated meter. (Just click)

All wallboxes and mobile chargers from
stark-in-strom.de have installed 6mA residual current protection modules as standard.
This means you can easily connect our wall boxes to your home power network.

There is no need to buy a very expensive FI type B all-current sensitive for wall boxes and
Mobile chargers from stark-in-strom.de. Your connection should only have one
have a simple FI type A (price approx. €29). As a rule, however, this is the case
already installed in your house, as this FI regulation is in Germany.

All wallboxes and mobile chargers from stark-in-strom.de have static load management installed as standard .
This means you can always adapt the charging power of the wallbox to your home network or solar system . You can easily and conveniently set this in 5 switching stages in your wallbox using a rotary switch.
All of this is explained in the operating instructions, which you are welcome to obtain in advance for all of our wallboxes and mobile chargers Feel free to download from the respective offer.