WALLBOX / CHARGING STATION DUO 2 charging points with 11 KW each

At home you have the option of charging your car via a wallbox, which can easily be mounted on your house wall or on a designated column (Steele).

You also have the option of charging your car using a secure mobile charging cable, also known as a wallbox, such as our Optima Portable or our Charge & Count 2.0 . Remember that a charging cable or wallbox from stark-in-strom.de not only charges your car more safely than a household socket, but also up to 4 times faster .

As a rule of thumb, you can expect 4-5 hours for a standard electric car, depending on the battery size, on a wallbox with 11 kW.

A wallbox (or wall charging station) controls the charging process of your electric car in your home.You
can be conveniently mounted on the wall (e.g. in the garage) or on a column
(Steele). Wallboxes connect the power connection
safe with your electric car.

You can easily plug a wallbox into your home power connection.

There are basically two options here, on the one hand you can use one of our plug & play wallboxes, e.g. Easy Charge 2.0 , and plug it into your existing CEE socket (red power socket) without an electrician and start charging straight away, as all components relevant to operational safety, e.g. 6mA DC Protection is installed as standard in all wallboxes in our company. Option 2 would be to connect it to your home power network; for this you need a qualified electrician who can install the wallbox for you and guarantee the necessary protection for the connection.

Info: For wallboxes up to 11Kw, the electrician must provide a 3-pole C-16 backup fuse; for wallboxes up to 22Kw you need a 3-pole C-32 backup fuse. You are also welcome to use our connection distributor for safe installation.

An 11 kW wallbox only requires registration . Should the
However, if the total output of a wallbox is 22 kW, the wallbox requires approval.
By the way, this also applies if you have a DUO-CHARGE wallbox
Have a wallbox with two charging points. If each charging point has 11 kW, that is
Wallbox requires approval because the total output is then 22 kW. The legal basis for this is regulated in Section 19 of the Low Voltage Connection Ordinance (NAV). The regulation stipulates that since March 21, 2019, private operators have also been obliged to register their wallbox with the responsible network operator.

Modular means all the individual parts of the wallbox
are interchangeable. For example, if you notice this after changing your car
If a longer charging cable would be better, you can get this from us later
let grow. Should a part come in after years of perfect operation
If the wallbox breaks, send the wallbox back to stark-in-strom.de
and we will create a repair offer. This is possible because every part in ours
Wallboxes are interchangeable and use many standard components
can be. This means that the wallbox from stark-in-strom is absolutely sustainable
Champion.

Our wallboxes are compatible with all electric vehicle manufacturers. The only crucial thing is that the electric vehicles have a TYPE 2 connection ; this applies to 95% of all European vehicle manufacturers. If you have any questions in advance about the compatibility of our wallboxes, please send us an email to technik@fbt-solution.de

All vehicles manufactured in Europe have a Type 2 plug. If you have a vehicle from an Asian manufacturer with a Type 1 plug, please send us an email to anfrage@fbt-solution.de

All of our wallboxes from the EASY-CHARGE 2.0 and DUO-CHARGE 2.0 series have MID calibrated meters , so you don't
Not only can you see how much electricity your car has used, but you can also bill the electricity with a third party. With our Connect variants, you also have the option of viewing all consumption on an hourly basis using the evaluation software.

All of our wallboxes and mobile chargers have MID-calibrated meters including an S-0 pulse output with which you can upload the meter to your automation solution. The frequency of the pulses is 800 pulses per kWh. If the aim is to bill external third parties, the wallbox must be equipped with a MID-calibrated electricity meter. This primarily concerns billing of company cars to the employer or the tax office. All wallboxes from stark-in-strom.de fulfill all of this. Click here for the technical data sheet of our MID-calibrated meter. (Just click)

All wallboxes and mobile chargers from
stark-in-strom.de have installed 6mA residual current protection modules as standard.
This means you can easily connect our wall boxes to your home power network.

There is no need to buy a very expensive FI type B all-current sensitive for wall boxes and
Mobile chargers from stark-in-strom.de. Your connection should only have one
have a simple FI type A (price approx. €29). As a rule, however, this is the case
already installed in your house, as this FI regulation is in Germany.

FI type B is already installed in all of our wallboxes and chargers in the form of a so-called RCMU (in the form of a ring through which the cables are routed). This protects people not only from alternating current errors (AC), but also from (DC) direct current residual currents which occur when charging an electric car. The 6mA DC protection, which is built into all of our products, protects you from external costs in the form of FI type B all-current sensitive in the amount of 249,-.

FI type A is the name given to the standard household residual current circuit breaker. Since it can only detect alternating current (AC) errors, it is unsuitable for protecting a wallbox where DC residual currents can also arise.

Static load management: Is installed as standard in all wallboxes from FBT. You have the option of creating 5 individual charging profiles, e.g. 6A/9A/12A/14A/16A. You can use these to use the external button which is installed on every wallbox and mobile charger select. If your house connection only allows 12A, set the wallbox to 12A; from now on, overloading the connection is impossible.

Dynamic load management: All wallboxes in the EASY-CHARGE 2.0 and DUO-CHARGE 2.0 series are already prepared for dynamic load management (Clever-Control) and will be available to you from 02/24.

Example: 4 wallboxes of 11Kw each are to be installed, but the power connection only allows a maximum of 33Kw, which means that the first 3 electric cars can each be charged with 11Kw. If a 4th electric car is now added, the 33kw will be dynamically increased to 4 Cars are distributed, which means that each of the 4 cars now charges with 8.25 kW, an overload of the house connection is now ruled out.

All wallboxes and mobile chargers from stark-in-strom.de have static load management installed as standard .
This means you can always adapt the charging power of the wallbox to your home network or solar system . You can easily and conveniently set this in 5 switching stages in your wallbox using a rotary switch.
All of this is explained in the operating instructions, which you are welcome to obtain in advance for all of our wallboxes and mobile chargers Feel free to download from the respective offer.

You can get our charging solutions Made in Germany from just €659 for the permanently installed wallbox, plus the installation costs for the electrician. Please contact us directly and we will find a suitable solution for you.